There are 3 ways to create a group.
But first, we need to define meaning of group properties:
Name - group name.
Group type - specification of a group. It can be one of the following values:
General - just a group of devices, nothing special.
Marked Bay - a group of parking sensors on a parked parking bay or parking plate.
Unmarked Bay - a group of parking sensors on an unmarked parking bay or on-street parking
Standalone Car Counters - a group of special devices “car counter”. This type of devices is used to count cars which go in and out of a parking lot.
Array Car Counters - a group of special devices “car counters”. This type of devices is used as a counter of cars which go in and out of a parking lots with wide gates.
Custom ID - user-defined ID of the group. It can be used for identifying groups in data that is sent to client’s services from the Nwave cloud.
Batch - name of a batch which the group belongs to.
Creating a group from the menu “Groups”
1 | Open the side panel by clicking the hamburger menu in the top left corner. | |
2 | Go to the menu Devices → Device management → Groups | |
3 | Press button “+” at right bottom | |
4 | Fill in the form and press button “Save” at the right top corner |
Creating a group from the personal batch page
1 | Open the main menu using button in the left top corner. | |
2 | Go to the menu Devices → Device management → Batches. | |
3 | Select a batch in the list. | |
4 | Go to “groups” tab | |
5 | Press button “+” at right bottom | |
6 | Fill in the form and press button “Save” at the right top corner. You don’t need to select Batch in this form. |
Creating a group using Splace
Splace is a special mobile app for device management.
1 | Open the Splace app and log in | |
2 | Select a batch. | |
3 | Tap on selector “Group” and select item “Create group” | |
4 | Fill in new group name and press “NEXT” | |
5 | Select group type and press “CREATE” | |
6 | The new group is created and selected |