There are 3 ways to create new group.

But firstly we need to define meaning of group properties:

Name - group name.
Group type - specification of a group. It can be one of the following values:
- Marked Spaces - a group of parking sensors on a marked parking bay or parking plate;
- Unmarked Bay - a group of parking sensors on an unmarked parking bay or on-street parking;
- Car Counters - a group of special devices “car counter”. This type of devices is used to count cars which go in and out of a parking lot;
Custom ID - user-defined ID of a group. It may be used for identifying groups in data that was sent to client’s services from the Nwave cloud.
Zone - name of a zone which the group belongs to.

Creating a group via “Groups” menu

1	Open the side panel by click on the hamburger menu in the upper left corner.
2	Navigate to the menu Devices → Device management → Groups
3	Click on button “+” in the lower right corner
4	Fill in the form and click on button “Save” in the upper right corner

Creating a group via a personal Zone page

1	Open the side panel by click on the hamburger menu in the upper left corner.
2	Navigate to the menu Devices → Device management → Zones.
3	Select a zone from the list.
4	Navigate to the Groups tab
5	Click on button “+” in the lower right corner
6	Fill in the form and click on button “Save” in the upper right corner. You don’t need to select a Zone on this form.

Splace2 is a special mobile application for device management.

1	Run the Splace2 app and log in
2	Click on main menu-> bind Group of devices or Bind device.
3	Select a zone and click on Group drop-down. Click on Create Group button.
4	Fill in new group name and click on “NEXT” button.
5	Select new group type and click on “CREATE” button.
6	New group is created and selected for bind.