There are 3 ways to create a new group.
But first, firstly we need to define meaning of group properties:
Name - group name.
Group type - specification of a group. It can be one of the following values:
General - just a group of devices, nothing special.;
Marked Parking Bay - a group of parking sensors on a parked marked parking bay or parking plate.;
Unmarked Parking Bay - a group of parking sensors on an unmarked parking bay or on-street parking;
Standalone Car Counters - a group of special devices “car counter”. This type of devices is used to count cars which go in and out of a parking lot.;
Array Car Counters - a group of special devices “car counters”. This type of devices is used as a counter of cars which go in and out of a parking lots with wide gates.;
Custom ID - user-defined ID of the a group. It can may be used for identifying groups in data that is was sent to client’s services from the Nwave cloud.
Batch Zone - name of a batch zone which the group belongs to.
Creating a group
...
via “Groups” menu
...
| 1 | Open the side panel by clicking click on the hamburger menu in the top upper left corner. |  |
| 2 | Go Navigate to the menu Devices → Device management → Groups |   |
| 3 | Press Click on button “+” at in the lower right bottom corner |   |
| 4 | Fill in the form and press click on button “Save” at in the upper right top corner |  |
Creating a group
...
via a personal
...
Zone page
| 1 | Open the main menu using button side panel by click on the hamburger menu in the upper left top corner. | |
| 2 | Go Navigate to the menu Devices → Device management → BatchesZones. |   |
| 3 | Select a batch in zone from the list. |   |
| 4 | Go Navigate to “groups” the Groups tab |   |
| 5 | Press Click on button “+” at in the lower right bottom corner |  |
| 6 | Fill in the form and press click on button “Save” at in the upper right top corner. You don’t need to select Batch in a Zone on this form. |   |
Creating a group using
...
Splace2 application
Splace Splace2 is a special mobile app application for device management.
| 1 | Open Run the Splace Splace2 app and log in | ||
| 2 | Select a batchClick on main menu-> bind Group of devices or Bind device. |   | |
| 3 | Tap on selector “Group” and select item “Create group” |  Select a zone and click on Group drop-down. Click on Create Group button. |  |
| 4 | Fill in new group name and press click on “NEXT” button. |   | |
| 5 | Select new group type and press click on “CREATE” button. |   | |
| 6 | The new New group is created and selected for bind. |   |