...
Let's consider an example of adding a Responsible Person:
Go to a station page and click on [+] button next to the ADD RESPONSIBLE PERSONS label.
...
If you want to add a Responsible Person who is not registered in the Nwave’s Console, fill the Responsible Person Registration form and press the ADD button.
...
If you want to add an existing console user as a responsible person, you can switch
...
to the right tab and choose one of the Nwave Console Users or one of the previously added
...
responsible persons.
...
When you complete these steps, your Responsible Persons will be added to the list. They will receive an email notification in case of when the station will get go offline or lose connection to the radio-receiver.
...
You are able to see all the responsible persons and their responsibilities on in the page Settings → Responsible Persons page.
...
...
SPlace integration
Now, you don't need to open a new tab and go to the web-version of Splace the SPlace App each every time you want to position devices on the map. We have added 
buttons on the pages:
...
When you click on this button, Splace SPlace will be opened in a new window and partial data will be already filled in. For example, let’s consider a devices device positioning by example:
Find an unpositioned device on the page Device Management → Devices page and click on the
button
You will see an opened window with A new window will be opened with the web-version of Splace the SPlace App. If you never logged in itbefore, please do. You can use the credentials of d.nwave.io for to log in Splace to SPlace App. If you logged in at least once, you will see the BIND DEVICE form of binding a single device:
Select or create a Zone, Level and a Group for a new position. Click on the BIND button BIND to proceed.
Set location of the new position. You can move map under the yellow marker pin and use zoom to set the location precisely. Click on the OK button OK to create a the new position for the device.
The position is created and the device is bound to it. Now you can click on the marker and see that the device is on in the position.
| Note |
|---|
Be careful Devices in the boxes have to be activated and calibrated before using. You can do that only by Splace Android App with the SPlace and Device Management Android appapps. The method of device positioning by in the Splace SPlace Web App is possible only for previously should only be used with already calibrated devices. Devices which was were never calibrated will not send any data until calibration by the smartphoneis performed. |