...

To initiate calibration just add a sensor to the list, click on the sensor’s record and press Calibrate in the pop-up menu.

Firmware update

...

1. Menu item to select firmware

2. Switch to enable/disable Update mode(bulk update)

Step-by-step instructions to update a single device

1. Select the firmware file by clicking Options (stack menu) -> Select Firmware

2. Tap on the selected device’s record

3. Choose Update Firmware item in the pop-up menu

Step-by-step instructions to perform a bulk update

1. Select the firmware file by clicking Options (stack menu) -> Select Firmware

2. Set the Updater Mode: Options -> Updater mode

3. Add multiple devices by scanning BLE devices, entering box numbers or serial numbers

When a device has been updated its record becomes green. In case of firmware loading error tap on the device’s record and select “Retry”.

for optimal loading speed the box and the phone need to be at least 50ft away from the main pallet or sensor storage (minimizes Bluetooth interference)

Note for bulk update of sensors inside boxes: If you have many sensors nearby(greater than 100) it is better to update boxes one-by-one at least 15m(50ft) away from the rest of the sensors(including updated sensors).