Table of contents
Table of Contents |
---|
Introduction
Device Management app is used to calibrate, reboot, and update Nwave devices via BLE. Some of these operations are used in the Splace and Replace applications which allow you to manage installations(deployment) and replacements. The application requires an internet connection to make this process secure. User management configuration allows limiting which operations and on which devices each user(client can have multiple users with different permissions to different projects) can perform. Generally, you need to be not farther than 10 meters from a device to interact with it in the app.
Login
To log in to the app you must first create an account in d.nwave.io using PIN-code which was provided to you. After that, you can use the same credentials in the app.
Application view
...
List of devices on which you can perform different actions
Button to scan nearby BLE devices, only Nwave devices will be shown
Button to add devices by their serial number.
Button to scan QR code to add a device to the list
Button to enter box number to add all sensors from the box to the list
Button to Open options menu
Pop-up menu with available actions for the selected device(click on device record to open the menu)
...
serial number
type of device
firmware name/ version
status of the last operation(the record becoming green after successful command completion)
Calibration
Calibration of parking sensors should be done when the parking space is free. The sensors perform continuous self-calibration and after some time will become fully calibrated even if the calibration was performed on an occupied sensor.
...