...
When you receive tags they are usually in special energy-saving mode. In this mode, check-in functionality is disabled. If you click on the tag button, it will blink 3 times without any sound. To activate a device you need to click on the button and hold on until the tag will blink additional 3 times (approximately 5 seconds). After that, the tag will be activated. Activation is finished within about 40s and there is a siren-like sound indicating it.
2 Correct sensor firmware (Parking Sensor
...
G3)
Sensors must have appropriate firmware to support tag check-in functionality. Firmware name has “full check-in” in it (for example, “PS full check-in UK B1”). You can check current firmware and update sensors using Nwave Device Management App. Appropriate firmware for the EU and the US may be found here. You can check which band/frequency your base station uses via Nwave Console Base Stations.
...