...
All sensors can be registered under the same project, zone, and group.
For the correct working of the sensor configuration, the positions must be marked with labels by the following rulesensors to function correctly, label each position as follows:
Entry sensor position - label
Status colour Blue title IN Exist sensor position - label
Status colour Blue title out EV sensor positions - label
Status colour Blue title EV
As long as Given that the parking area contains has a total of 20 spaces, set the Zone zone capacity must be set to 20 by these using the following instructions: https://nwaveio.atlassian.net/wiki/spaces/ND/pages/3018686469/Car+Counters+Getting+Started#Capacity-configuration
| Info |
|---|
You can read more about the sensor positioning in these documents: |
Since Once sensors are positioned and labeled, the analytics, car counting, and real-time parking systems start will begin processing data.
Now you can see full parking occupancy on the A nalytics Analytics Car-Counters page.
Please , keep in mind, note that per-space and car-counting systems are different onesFor, so you should get separate, and each requires data from different distinct APIs. For example, If you need to get full parking occupancy data, you can use the following request to the car counters analytics API:
| Code Block | ||
|---|---|---|
| ||
curl --request GET 'https://api.nwave.io/analytics/v1/car_counters/realtime/occupancy_summary?group_by=group&zone_id=123' --header 'x-Auth-Token: XXXXXXXXXXXX' |
Even though, for getting occupancy of To retrieve occupancy data exclusively for EV spaces only, you should use the per-space analytics API:
| Code Block | ||
|---|---|---|
| ||
curl --request GET 'https://api.nwave.io/analytics/v1/realtime/occupancy_summary?zone_id=123&labels=EV&group_by=zone' --header 'x-Auth-Token: XXXXXXXXXXXX' |
However, if you use are using GraphQL API v2, you can use the same API for getting obtain occupancy data for both CC and PS occupancy data.Additional information about the API is available on pagessensors using a single API.
For further details, please refer to: