...
The Debug messages use port 6 and they are always unconfirmed. By default, these messages are enabled and have no repetitions, but they may be disabled or increased by the number of repetitions used (see downlink messages). These messages do not have a fixed length as their payload depends on the type of debug message.
The first 2 bytes of the payload represent the debug code in Big Endian format, and the rest of the payload(if any) contains additional parameters which meaning depend on the exact debug code.
Debug code | Meaning | Additional parameters |
|---|---|---|
404 (0x194) | Calibration has been competed. The calibration could have been an initial calibration after activation or requested by user calibration. Automatic calibration (adjustment to changing environment) does not cause this message to be sent. | 1 byte |
899 (0x383) | Invalid user request. The downlink command has not been recognised or provided configuration cannot be used. | None |
805 (0x325) | No change in configuration. Provided configuration parameters are equal to the current parameters in use | None |
4.2.6 Configuration feedback message
...