...
Byte | Bits | Name | Default value |
|---|---|---|---|
0 | 02..20 | DataRate configuration | 2 (DR2) |
3 | Enable ADR(Adaptive Data Rate):
| 0 | |
46..64 | Counter update confirmation configuration | 1(Unconfirmed with 1 uplink message(0 repetitions)) | |
7 | Reserved | 0 |
...
Update transmission threshold configuration uses port 53. The configuration selected is persistent. The configuration is a table where every record represents a point of the counter update threshold curve. If elapsed time of a record is equal to 0xFFF, this record is not used.
Byte | Bits | Name |
|---|---|---|
0 | 47..74 | Record 1 - Number of events |
3..0 | Record 1 - Elapsed time, seconds(bits 11..8) | |
1 | 7..0 | Record 1 - Elapsed time, seconds(bits 7..0) |
2 | 47..74 | Record 2 - Number of events |
3..0 | Record 2 - Elapsed time, seconds(bits 11..8) | |
3 | 7..0 | Record 2 - Elapsed time, seconds(bits 7..0) |
4 | 47..74 | Record 3 - Number of events |
3..0 | Record 3 - Elapsed time, seconds(bits 11..8) | |
5 | 7..0 | Record 3 - Elapsed time, seconds(bits 7..0) |
6 | 47..74 | Record 4 - Number of events |
3..0 | Record 4 - Elapsed time, seconds(bits 11..8) | |
7 | 7..0 | Record 4 - Elapsed time, seconds(bits 7..0) |
8 | 47..74 | Record 5 - Number of events |
3..0 | Record 5 - Elapsed time, seconds(bits 11..8) | |
9 | 7..0 | Record 5 - Elapsed time, seconds(bits 7..0) |
...
Byte | Bits | Name | Default value |
|---|---|---|---|
0 | 03..30 | Heartbeat NACK limit | 3 |
47..74 | Reserved | 0 |
4.3.6 Command
Command uses port 71 and it is used to initiate different commands mainly for debugging.
...