The Nwave approach is “all sensors must be position positioned before using”. While a sensor is not positioned , you can only see raw messages getting from it. It looks like sentence of heximal numbers. Not It is not too useful.
But when you set a sensor position of sensor, you makes self able to use open for using the following features:
Device Monitoring to - for getting information about sensor health;
Occupancy - for monitoring which allows you to getting know which sensors are vacant and which are not;
HTTP outgoing calls - for getting occupancy data using HTTP triggered by triggers about sensor occupancy states changeRabbitMQ Parking API changes;
| Tip |
|---|
Even if you make your first steps in Nwave Console with using of Test Devices, you should set them positioin their positioins before the its using. |
How To set sensor position
Nwave provides a special tool for managing of sensor positions management. It is called Splace. You have two options types of Splace using:
Web-version on http://splace.nwave.io/
Android App
Installing Splace for Android
...
Android App is much more functional that than Web Version. With It is you are able to set up and calibrates calibrate sensors using Bluetooth. But you need to install Nwave Device Management App first. When the installation is finished, completed you should download and install the APK distribution of Splace App.
...
Position setting
As you can see at it in the Nwave ecosystem document, Nwave stores sensor's positions in the hierarchy. Before the setting a sensor position, you have need to create to or select existing project, zone, level and group. Level and group are able to may be created right now in the Splace App, be but project and zone must be registered using Nwave Console.
When you use Using Splace , you can set position positions sensor by sensor, or set positions for a batch Zone of sensors in with one step. Both scenarios are considered in our Video Tutorial:
...